Products - Nevigation Menu
- Drifter 120F
- Ingersoll Rand Vl-140 Pneumatic Drifter
- ATLAS COPCO 57-01 Pneumatic Top Hammer
- Atlas Copco Bbc 100 F Pneumatic Drifter
- Jack Hammer
- Rock drill
- Rock Drill 12 D
- Pusher Leg
- Feathers and Wedges
- Integral Drill Steel
- Taper Button Bits
- Atlas Copco rock drill BBD 90WN
- Atlas Copco rock drill BBD 94W, BBD 95W
- Atlas Copco Stoper BBD 46WS
- Paving Breaker CP 0112
- Paving Breaker KSC 1223
- Paving Breaker KSC 1323
- Paving Breaker KSC 1123
- Paving Breaker KSC 0223
- Paving Breaker Moil & Chiesel Points
- Rotation Unit Atlas Copco Wagon Drill Parts
- Planetary Gearing Atlas Copco Wagon Drill Parts
- Feed Unit Complete Atlas Copco Wagon Drill Parts
- Cradle Complete Atlas Copco Wagon Drill Parts
- Boom Head Atlas Copco Wagon Drill Parts
- Chain Feed Atlas Copco Wagon Drill Parts
- Feed Beam Holder Compl. Atlas Copco Wagon Drill Parts
- Motor Atlas Copco Wagon Drill Parts
- Worm Gear Box Compl. Single Start Wagon Drill Parts
- Gear Housing Complete Atlas Copco Wagon Drill Parts
- Drill Steel Support Comp. 102 mm Replacement
- Drill Steel Support Comp Pneumatic Version
- Traction Unit Atlas Copco Wagon Drill Parts
- Rubber Conveyor Belt
- Vibrating High Carbon Wire Meshes
- Shaft Mounted Speed Reducer
- Helical GearBox
- Self Cleaning Electro Suspension Magnet
- Permanent Suspension Magnet
- Conveyor Belt Fasteners
- T-Series Round Shaft Mounted Speed Reducer
- Crusher Jaw Plate
- Crusher Backing Compound
- Crusher Sprocket And Chain
- V Belt for Crusher
- Crusher Bolts And Springs
- Conveyor Belt Idlers, Roller & Bearing Housing
- Wire Mesh Rubber Beading
Product Specification
Atlas Copco Stoper BBD 46WS:
Stopers are made for vertical or inclined environments. The machines are especially designed for production drilling, raise driving and roof bolting. Thanks to the ratchet wheel rotation and short piston stroke you get good penetration rates in soft and medium hard rock While you are drilling, air blows through the system to clean the rotation chuck and lubricate the drill steel shank. The WR versions has clockwise rotation and can be used for tightening or installing screen on threaded roof bolts.
Powerful :The stoper provides short stroke with good penetration rates. The large piston diameter gives high efficiency even at low air pressure KSC Mettalurgy for softer rocks.
The BBD 46 WS : KSC Mettalurgy provides a high impact rate for good performance in soft to medium rock Go clockwise.
The WS : versions comes with clockwise rotation for tightening nuts and roof bolting.
When you do : Production drilling, raise driving and bolting in soft to medium hard rock.
Powerful :The stoper provides short stroke with good penetration rates. The large piston diameter gives high efficiency even at low air pressure KSC Mettalurgy for softer rocks.
The BBD 46 WS : KSC Mettalurgy provides a high impact rate for good performance in soft to medium rock Go clockwise.
The WS : versions comes with clockwise rotation for tightening nuts and roof bolting.
When you do : Production drilling, raise driving and bolting in soft to medium hard rock.
PART LIST FOR ATLAS COPCO STOPER BBD 46 WS
| Ref. No. | Part Number | BBD 46 WS 6 |
BBD 46 WS 8 |
Description |
| 3131 0140 80 | 1 | 1 | Back head, compl | |
| 1 | — *) | 1 | 1 | Back head |
| 2 | 3131 0002 00 | 1 | 1 | Valve |
| 3 | 3121 0065 00 | 1 | 1 | Lever |
| 4 | 3006 8734 00 | 1 | 1 | Conical nut |
| 5 | 3121 0066 00 | 1 | 1 | Pawl pin |
| 6 | 3121 0067 00 | 1 | 1 | Spring |
| 7 | 3121 0070 00 | 1 | 1 | Valve pin |
| 8 | 3106 9670 00 | 1 | 1 | Packing |
| 9 | 3121 0071 00 | 1 | 1 | Bushing |
| 10 | 3106 9673 00 | 1 | 1 | Valve seat |
| 11 | 3121 0072 00 | 1 | 1 | Packing |
| 12 | 3115 0982 80 | 1 | 1 | Valve body, compl. |
| — *) | 1 | 1 | Valve body | |
| 0663 2112 00 | 1 | 1 | 0-ring | |
| 13 | 3100 9240 21 | 1 | 1 | Conical spring |
| 14 | 3106 9676 00 | 1 | 1 | Adapter |
| 15 | 3106 9675 00 | 1 | 1 | Packing |
| 16 | 3106 8747 00 | 1 | 1 | Inlet nipple |
| 17 | 3121 0068 00 | 1 | 1 | Adapter |
| 18 | 3100 9642 00 | 1 | 1 | Adapter |
| 19 | 3121 0010 00 | 1 | 1 | Adapter |
| 20 | 3121 0011 00 | 1 | 1 | Strainer |
| 21 | 3121 0012 00 | 1 | 1 | Packing |
| 22 | 3100 9653 00 | 1 | 1 | Packing |
| 23 | 3100 9654 00 | 1 | 1 | Hose nipple 12.5 mm (1/2") |
| 24 | 3100 9652 00 | 1 | 1 | Adapter |
| 25 | 3131 0142 00 | 1 | 1 | Air flushing tube |
| 26 | 3121 0038 00 | 1 | 1 | Water flushing tube |
| 27 | 3121 0602 00 | 1 | 1 | Packing |
| 28 | 3100 9646 00 | 1 | 1 | Packing |
| 29 | 3121 0776 00 | 1 | 1 | Guide ring |
| 30 | 3131 0141 00 | 1 | 1 | Adapter |
| 31 | 3101 4146 00 | 1 | 1 | Packing |
| 32 | 0663 6136 00 | 1 | 1 | 0-ring |
| 33 | 3121 0851 00 | 1 | 1 | Drill steel retainer |
| 34 | 3121 0107 01 | 1 | 1 | Cover |
| 35 | 0663 2114 00 | 1 | 1 | 0-ring |
| 36 | 0108 1325 00 | 1 | 1 | Spring pin |
| 37 | 3121 0486 00 | 1 | 1 | Main valve |
| 38 | 3131 0004 00 | 1 | 1 | Cylinder |
| 39 | 3121 0015 00 | 1 | 1 | Piston |
| 40 | 3121 0852 00 | 1 | 1 | Retainer pin |
| 41 | 3121 0085 00 | 1 | 1 | Intermediate part |
| 42 | 3121 0086 00 | 1 | 1 | Bushing |
PART LIST FOR ATLAS COPCO STOPER BBD 46 WS
PART LIST FOR ATLAS COPCO STOPER BBD 46 WS
| Ref No. | Part Number | BBD 46 WS 6 |
BBD 46 WS 8 |
Description |
| 43 | 3131 0005 00 | 1 | 1 | Lever |
| 44 | 3131 0006 00 | 1 | 1 | Spring |
| 45 | 3131 0007 00 | 1 | 1 | Valve sleeve |
| 46 | 3131 0008 00 | 1 | 1 | Valve pin |
| 47 | 3131 0009 00 | 1 | 1 | Valve body |
| 48 | 0663 2124 00 | 1 | 1 | 0-ring |
| 49 | 3131 0017 00 | 1 | 1 | Conical nut |
| 3131 0010 80 | 1 | 1 | Valve, compl | |
| 50 | — *) | 1 | 1 | Valve |
| 51 | — *) | 1 | 1 | Valve liner |
| 52 | 0663 2128 00 | 5 | 5 | 0-ring |
| 53 | 3131 0011 00 | 1 | 1 | Shaft |
| 54 | 3131 0012 00 | 1 | 1 | Wheel |
| 55 | 3131 0013 00 | 1 | 1 | Nut |
| 56 | 3131 0014 00 | 1 | 1 | Adapter |
| 57 | 3131 0015 00 | 1 | 1 | Washer |
| 58 | 3131 0016 00 | 1 | 1 | Spring |
| 59 | 0663 2122 00 | 2 | 2 | 0-ring |
| 60 | 3121 0029 00 | 1 | 1 | Buffer plate |
| 61 | 3121 0030 00 | 1 | 1 | Buffer |
| 62 | 3121 0880 00 | 1 | 1 | Ratchet wheel |
| 63 | 3121 0896 00 | 1 | 1 | Rifle nut |
| 64 | 0102 0279 00 | 2 | 2 | Pin |
| 3115 9201 90 | 1 | 1 | Pawl set | |
| 65 | 3101 3159 00 | 4 | 4 | Pawl |
| 66 | 3121 0020 00 | 4 | 4 | Pressure spring |
| 67 | 3121 0021 00 | 4 | 4 | Pawl pin |
| 68 | 3121 0872 00 | 2 | 2 | Side bolt nut |
| 69 | 9000 0326 00 | 1 | 1 | Hose nipple 25 mm (1") |
| 70 | 9000 0339 00 | 1 | 1 | Wing nut |
| 71 | 0108 3392 00 | 2 | 2 | Spring pin |
| 72 | 3121 0099 00 | 1 | 1 | Rotation chuck |
| 73 | 3121 0846 00 | 1 | 1 | Rotation chuck bushing |
| 22x 108 mm (7/8" x 4 1/41 | ||||
| 74 | 3121 0101 00 | 1 | 1 | Chuck nut |
| 75 | 3121 0102 00 | 1 | 1 | Front head |
