Products - Nevigation Menu
- Drifter 120F
- Ingersoll Rand Vl-140 Pneumatic Drifter
- ATLAS COPCO 57-01 Pneumatic Top Hammer
- Atlas Copco Bbc 100 F Pneumatic Drifter
- Jack Hammer
- Rock drill
- Rock Drill 12 D
- Pusher Leg
- Feathers and Wedges
- Integral Drill Steel
- Taper Button Bits
- Atlas Copco rock drill BBD 90WN
- Atlas Copco rock drill BBD 94W, BBD 95W
- Atlas Copco Stoper BBD 46WS
- Paving Breaker CP 0112
- Paving Breaker KSC 1223
- Paving Breaker KSC 1323
- Paving Breaker KSC 1123
- Paving Breaker KSC 0223
- Paving Breaker Moil & Chiesel Points
- Rotation Unit Atlas Copco Wagon Drill Parts
- Planetary Gearing Atlas Copco Wagon Drill Parts
- Feed Unit Complete Atlas Copco Wagon Drill Parts
- Cradle Complete Atlas Copco Wagon Drill Parts
- Boom Head Atlas Copco Wagon Drill Parts
- Chain Feed Atlas Copco Wagon Drill Parts
- Feed Beam Holder Compl. Atlas Copco Wagon Drill Parts
- Motor Atlas Copco Wagon Drill Parts
- Worm Gear Box Compl. Single Start Wagon Drill Parts
- Gear Housing Complete Atlas Copco Wagon Drill Parts
- Drill Steel Support Comp. 102 mm Replacement
- Drill Steel Support Comp Pneumatic Version
- Traction Unit Atlas Copco Wagon Drill Parts
- Rubber Conveyor Belt
- Vibrating High Carbon Wire Meshes
- Shaft Mounted Speed Reducer
- Helical GearBox
- Self Cleaning Electro Suspension Magnet
- Permanent Suspension Magnet
- Conveyor Belt Fasteners
- T-Series Round Shaft Mounted Speed Reducer
- Crusher Jaw Plate
- Crusher Backing Compound
- Crusher Sprocket And Chain
- V Belt for Crusher
- Crusher Bolts And Springs
- Conveyor Belt Idlers, Roller & Bearing Housing
- Wire Mesh Rubber Beading
Product Specification
Junior Simba:
Simba Junior ring drilling rig is a high productive long hole drilling arrangement at a low investment. This is a simple; one man operated rig, patterned to produce blast holes around 360 degrees. Hole patterns may be drilled vertically or inclined as required.
The complete Simba Junior includes KSC-120F Drifter, complete Remote Control system, BSP-10 Drill Steel Support, BMS-46 Feed Beam and feed motor.
KSC-METALLURGY. DESIGN AND SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE OR OBLIGATIONS.
The complete Simba Junior includes KSC-120F Drifter, complete Remote Control system, BSP-10 Drill Steel Support, BMS-46 Feed Beam and feed motor.
|
TECHNICAL DATA
|
|
| Diameter of Hole | 28mm-76mm with Cross Bit and Button Bit. |
| Hole Depth of 1.2 mtr. each | Up to 25 mtr. by 32 mm extension rod of 1.2 mtr. each. |
| Hole Direction same hole | Vertically upward & capable of doing same hole in 360 Degree direction, by help of graduated ring frame. |
| Compatible Drifter | KSC 120 F |
| Air connection for Drifter | 38 mm |
| Air connection for reverse / forward | 12 mm |
| Air connection for water flushing | 20 mm |
| Air connection for Rod Catcher | 10 mm |
| Feed Mechanism | Material : Steel graded casting for ling life & less wear and tear and less thread failing length: 1760 mm;, equivalent to BMS-46 model to accommodate 1.2 meter of R 32 mm Dia Drill rods. |
| Guide Rail | Steel single piece 'F' type design with bolt & nuts |
| Lateral movement (Optional) | By manual feed screw of 54 mm to travel the feed beam in either direction up to 550 mm from centre. For doing upward hole at 3 positions without shifting the complete machine. |
| Mounting | Ø Hollow MS Pipe collapsible type mounting Ø Easily assemble & dissemble in underground mines. Ø Full system can be angled into all direction as the Drifter, Feed Beam and rod catcher will be mounted on a ring frame. |
| Remote Cradel | Equipped with Remote Control |
| Steel casting with 2 clamps & nut bolts to hold 120 F drifter. | |
COMPRESSOR:
12.7M3/MIN -10.5 KG/CM2 (450CFM-150PSI) ACCEPTABLE PRODUCT IMPROVEMENT IS A CONTINUING GOAL OFKSC-METALLURGY. DESIGN AND SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE OR OBLIGATIONS.
